What is inside an NFC business card?

A flat antenna coil and a small chip, sealed inside plastic, wood or metal. The most common chips are NXP’s NTAG213, NTAG215 and NTAG216, which hold 144, 504 and 888 bytes of user memory.

That is not much, and it doesn’t need to be. The card usually stores one short web address that opens your digital business card. Everything else lives on that page.

Common NFC chips for business cards
ChipUser memoryApprox. URL lengthTypical use
NTAG213144 bytesAbout 130 charactersBusiness cards, stickers
NTAG215504 bytesAbout 480 charactersCards, game figures
NTAG216888 bytesAbout 850 charactersWhen you want more room

What happens when someone taps the card?

The whole exchange takes under a second.

  1. The phone’s NFC reader sends out a weak radio field.
  2. Held within about 4 cm, the card’s antenna picks up enough energy to power the chip.
  3. The chip sends back its stored record, usually a URL in the standard NDEF format.
  4. The phone shows a notification or opens the link in the browser.
  5. Your digital card loads, and they tap Save contact to add you via vCard.

Which phones can read NFC business cards?

Most phones made in the last several years. On iPhone, background tag reading works on the iPhone XS, XS Max, XR and every later model, as long as the screen is on and the phone has been unlocked since starting up. Older iPhones from 7 to X need an NFC reader app.

Most Android phones have NFC; it is usually on by default but can be switched off in settings. Some budget models have no NFC chip at all. A QR code on the same card covers those cases.

NFC support by phone
PhoneReads NFC cards without an app?
iPhone XS / XR and newerYes, with screen on
iPhone 7 to iPhone XOnly with an NFC reader app
iPhone 6 and olderNo
Most Android phonesYes, if NFC is on in settings
Some budget Android phonesNo NFC hardware

Where should someone tap?

The NFC reader sits near the top back of an iPhone, and usually in the middle or upper back of Android phones. Tell people “tap the top of your phone on the card” and hold it still for a second. Thick metal phone cases can block the signal.

Is NFC safe?

For business cards, yes. The card only holds a link, has a very short range, and can’t read anything from the phone. The phone still asks before opening most links. As with any link, only tap cards from people you trust.

NFC vs Bluetooth: what is the difference?

NFC works only at a few centimeters and needs no pairing; Bluetooth works across a room and usually needs pairing or permission. That short range is what makes an NFC tap feel instant and deliberate.

It is also why your card can’t be read from across a room. Someone has to bring a phone almost into contact with it.

Frequently asked questions

Do NFC business cards need a battery?

No. The phone’s radio field powers the chip during the tap. The card has no battery and can last for years. There is nothing to charge or replace, and the chip only wakes up for the split second a phone is close enough to power it.

Do I need an app to read an NFC business card?

No, on iPhone XS and later and on most Android phones with NFC switched on. The phone shows a notification and opens the link in the browser. Older iPhones need a reader app.

How close does the phone need to be?

Very close, usually within about 4 cm. In practice people touch the top back of the phone to the card and hold it for a second. Thick or metal phone cases can make it harder.

Can I use any NFC card with Me.Plus?

Yes. Any NFC card or sticker can be written with your Me.Plus page link. Me.Plus NFC cards add a short code you can re-point to another page. Writing it takes a free NFC app and about a minute.

What if the person’s phone doesn’t have NFC?

Print a QR code on the card too. Every phone camera can scan it, so you never lose a contact. See NFC vs QR code. Both should open the same page, so you only manage one destination.

Can an NFC card be hacked?

An unlocked card could be rewritten by someone with a writer app and physical access. Lock the card after writing, or use a link you control so you can fix the page side anytime.

Sources

  1. Apple Developer: Adding support for background tag reading
  2. MacRumors: 2018 iPhones support background NFC tag reading
  3. wakdev: NXP NTAG215 specifications
  4. Shop NFC: NFC chip comparison