How big should the QR code be?

At least 2 cm (about 0.8 in) square on a standard card, and 2.5 cm (1 in) if the design allows. Keep a quiet zone of at least four modules (the small squares) on every side, and a few extra millimeters so trimming doesn’t cut into it.

Short URLs make simpler codes with bigger modules, which scan faster at small sizes. A short address like yourname.me.plus helps.

How do you add a QR code to your card, step by step?

It takes about ten minutes, plus one printed proof before you order the full run.

  1. Set up the page the code will open. On Me.Plus, your page doubles as a digital card.
  2. Download your QR code from the dashboard, or make one with the free QR code generator.
  3. Export as SVG or PDF for print; use PNG only at high resolution.
  4. Place it on the back of the card or in a corner of the front, with a white margin around it.
  5. Add a short label: “Scan to save my contact”.
  6. Print one proof and scan it with an iPhone and an Android phone, in normal light, from a hand’s length.
  7. Order the full run only once both phones scan it quickly.

What design mistakes stop QR codes from scanning?

Most failed scans come from a handful of mistakes.

  • Light code on a dark background, or low contrast colors
  • No white margin around the code
  • Printed too small, or blurred from a low-resolution PNG
  • Too much data, such as a long URL or a full vCard with address and notes
  • A big logo in the middle that covers too much of the code
  • Glossy or metallic finishes that reflect light
  • Placing it over a fold, edge or textured area

Should you use a static or dynamic QR code?

If the code encodes your own page address, a static code is enough: you change the page, not the code. A dynamic code from a QR service adds scan counts, but ties your printed cards to that service.

Me.Plus shows visits to your page in its analytics, so you can see traffic from cards without a separate dynamic QR. To track print scans separately, add UTM parameters such as ?utm_source=card to the link before generating the code.

Can you add NFC as well?

Yes. A card with both an NFC chip and a QR code lets people tap or scan. Read NFC vs QR code business cards to decide whether the chip is worth it for you.

Where should the QR code go on the card?

On the back, or in a clear corner of the front. The back gives you room for a large code and a label without crowding your name and logo.

Keep it away from the edges so the trim doesn’t eat into the white margin, and don’t put it over a fold or a textured finish. Square or rounded card shapes both work as long as the code itself sits on a flat, matte area.

Frequently asked questions

Can a QR code save my contact directly?

Yes, if it encodes a vCard. Phones open it as a new contact. It can’t be changed after printing, so many people link to a page with a Save contact button instead. Our vCard generator makes both.

What is the minimum size for a QR code on a business card?

About 2 cm (0.8 in) square, with 2.5 cm (1 in) recommended. Keep a four-module white margin. Shorter links allow smaller codes. Always scan a printed proof on an iPhone and an Android phone before ordering the full run.

Can I put a logo in my QR code?

Yes, a small one. QR codes have error correction that tolerates some covered area. Keep the logo small and centered, use high error correction, and always test the printed result.

Can I use color in a QR code?

Yes, as long as the code is darker than the background with strong contrast. Dark navy or violet on white works. Avoid light codes on dark cards and red-green pairs.

Do QR codes expire?

A static QR code never expires; it works as long as the link does. Codes from some dynamic QR services stop working when your plan ends. Encoding your own page address avoids that.

Which file format should I give my printer?

SVG or PDF, which are vector and stay sharp at any size. Me.Plus lets you download your QR code as SVG, PNG or PDF. Ask your printer which they prefer, and avoid low-resolution screenshots, which blur at print size and can stop phones from reading the code.

Sources

  1. Bitly: what’s the minimum size for a QR code?
  2. Denso Wave: QR code information
  3. Mobilo: ideal QR code size on a business card